Builder Spotlight
Nardone 928: Top Gear on the Carbon-Fibre Porsche 928, Available Now at HK Motorcars
Top Gear’s Jason Barlow met the Nardone 928, a carbon-bodied reimagining of Porsche’s front-engined grand tourer. Here is what he reported, and the car now available at HK Motorcars in New York.
- By
- DriveMarket Editorial
- Published
- November 18, 2026

The Porsche 928 has always been the odd one out in the Porsche family: a front-engined, V8-powered grand tourer in a line-up built around the rear-engined 911. French start-up Nardone Automotive has rebuilt it as a carbon-bodied, modern grand tourer, and one is now available at HK Motorcars in Mount Kisco, New York. This story summarises how Top Gear’s Jason Barlow described the project when he met it.

At a glance
- Donor: Porsche 928, built from 1978 to 1995.
- Builder: Nardone Automotive, led by Thierry Nardone.
- Design and engineering partners named by Top Gear: BorromeodeSilva (design), Podium Advanced Technologies (build), Ital Tecnica (engine) and Involute (transmission).
- Body: carbon fibre, with only the doors left as original.
- Listed at HK Motorcars: naturally aspirated 5.0L V8, 450 hp, 6-speed manual with limited-slip differential, forged 18-inch wheels.
What Top Gear found
Barlow’s piece, published on 24 October 2024, covered the Nardone 928 alongside the Eccentrica Diablo, since both were engineered by Podium Advanced Technologies, an engineering company near Turin. He found the 928 a striking object in the flesh, and he noted that a Porsche restomod that is not a 911 is a rarity in itself.
He also gave the 928 some history. Porsche conceived it as a grand tourer with an eye on the American market, it was styled under Tony Lapine, and its passive rear-wheel steering and moving instrument binnacle set it apart. In the end the 911 prevailed, and Barlow calls the 928 its eccentric uncle.
Thierry Nardone is a car enthusiast and former restaurateur who borrowed money to realise his vision of a new 928. He told Top Gear he sees the result as closer to a continuation car than a restomod, aimed at comfort rather than ruthless weight saving. By Barlow’s account the project created about 3,000 new parts, including around 300 for the engine and 198 for the gearbox alone.

Under the skin
Barlow reported that only the doors remain from the original body. The rest is new carbon fibre, including a flush-mounted windscreen and A-pillar, and a rear hatch re-engineered so that only the glass opens.
The V8’s block, head and oil tank are original, joined by a new intake plenum, a more aggressive camshaft and a modern ECU. At the time of his piece the target was 400 bhp, with more said to be possible. The front and rear axles are new, the steering was re-engineered for more feel, and the car has active suspension, new hubs, custom bushes and Brembo brakes. Top Gear put the weight at about 1,400 kg, roughly 100 kg under the original.

