Builder Spotlight

Singer’s DLS Turbo “Light Poppy”: One Colour From Carbon to Cabin

Singer Vehicle Design’s latest finished DLS Turbo carries a single red-orange, Light Poppy, across its carbon bodywork, magnesium wheels and cabin, on the track specification of the 710 HP Type 964 programme.

By
DriveMarket Editorial
Published
November 17, 2026

View source

Singer’s DLS Turbo “Light Poppy”: One Colour From Carbon to Cabin

Singer Vehicle Design has shown a new DLS Turbo, a Type 964 reimagined through its twin-turbo programme, finished in Light Poppy. Simply Luxury and dlmag both report the car in early November 2026: a saturated red-orange carried across the carbon bodywork, the magnesium wheels and the leather and carbon cabin.

The photographs in this story are Singer’s own DLS Turbo images, in a ruby livery, from its DLS Turbo Services page. They are not the Light Poppy car.

Highlights

  • Colour: Light Poppy on the body, wheels, leather and trim, with Champagne calipers as the contrast.
  • Specification: track bodywork with a large rear wing and a track front fascia.
  • Wheels: two sets of forged magnesium centre-lock wheels, the second with turbofan-style covers.
  • Programme: DLS Turbo, 3.8-litre twin-turbo flat-six, 710 HP, six-speed manual, limited to 99 restorations.
  • Price: Singer publishes none; prices depend on each owner’s requests.

Colour discipline

Simply Luxury’s Harvey Hira describes an owner who carried one colour through every touchpoint: the carbon track seats, doors, steering wheel, dash trim and rear cabin cross brace all take the Light Poppy palette. dlmag’s Vincent Nguyen adds that leather covers the seats, dash pads, door cards and cross brace, with exposed carbon fibre for the console, dash structure and seat shells, and black four-point harnesses as the one dark note.

Simply Luxury credits its imagery to Singer’s Instagram account, and dlmag says Singer showed the car in a short film on its own channel. We could not find a Light Poppy page on Singer’s website.

Track bodywork and wheels

The car uses the track set: wider carbon fibre fenders, a deeper front fascia and a large rear wing, all in the same red-orange. The forged magnesium centre-lock wheels are finished in Light Poppy too, and the owner specified a second set with turbofan-style covers that both outlets describe as exclusive to DLS Turbo clients. Behind the wheels are CCM-R carbon-ceramic discs with Champagne calipers.

Inside, the floating DLS Turbo gauges sit in bespoke housings anodised to match the colourless anodised bright trim on the climate controls, dash pulls, window handles and drive-mode selector, according to Simply Luxury.

DLS Turbo track bodywork, shown on a different car on Singer’s DLS Turbo Services page. Photo: Singer Vehicle Design.
DLS Turbo track bodywork, shown on a different car on Singer’s DLS Turbo Services page. Photo: Singer Vehicle Design.

What is under the carbon

Singer’s own DLS Turbo specification gives a twin-turbocharged 3.8-litre flat-six based on the Type 964 engine, with 710 HP (SAE Net) and 553 ft-lb (750 Nm) of torque, a 9,000 rpm redline, rear-wheel drive and a six-speed manual with traction and stability control developed with Bosch. Simply Luxury and dlmag both put Light Poppy’s output at 710 HP, and dlmag says its hardware matches Sorcerer’s.

The DLS Turbo flat six. Image: Singer Vehicle Design.
The DLS Turbo flat six. Image: Singer Vehicle Design.

Where it sits in the programme

Singer presented DLS Turbo services on 27 June 2023, drawing on the 934/5 endurance racers of the 1970s, and limits the programme to 99 restorations. Its first finished car, “Sorcerer” in graduated Fantasia Blue, was delivered to its owner on 22 January 2026. Each restoration begins with the owner’s Type 964 and DLS Turbo restorations are carried out at Singer’s UK facility, according to Singer’s own release.