Builder Spotlight
Gunther Werks F-26: Hagerty and Hypebeast on the 1,000 hp Air-Cooled Slantnose
Hagerty covered the debut of Gunther Werks’ F-26, a 26-car, Slantnose-inspired, air-cooled twin-turbo 993, and Hypebeast Magazine profiled the company’s engineering approach. Here is what they reported.
- By
- DriveMarket Editorial
- Published
- November 19, 2026

Based on reporting by Steven Cole Smith, Hagerty Media (“911 Resto-Builder Gunther Werks Debuts Air-Cooled, 1000-Horse F-26”, 15 August 2025), with Eddie Eng, Hypebeast Magazine (“How to Turn a Vintage Porsche Into a Hypercar: Gunther Werks”, 12 November 2026). Read the Hagerty original · Read the Hypebeast original. This page is an own-words summary; all credit for the reporting belongs to the authors and publications.
Gunther Werks, the Huntington Beach company that remasters the Porsche 911, calls the F-26 the culmination of everything it has learned since its first build. This story summarises how Hagerty covered the car’s debut and how Hypebeast Magazine described the company’s approach.

At a glance
- Donor: Porsche 911 (993), stripped to the bare chassis and reinforced.
- Builder: Gunther Werks, founded by Peter Nam, who is also CEO of carbon-fibre specialist Vorsteiner.
- Powertrain, per Hagerty: Rothsport Racing-developed, air-cooled, twin-turbo 4.0-litre flat-six, 1,000 hp at 7,600 rpm and 750 lb-ft at 5,600 rpm, six-speed manual.
- Weight, per Hagerty: 2,750 lb curb weight.
- Production: 26 cars.
What Hagerty reported
Steven Cole Smith’s article, published on 15 August 2025, covers the F-26’s debut at The Quail, A Motorsports Gathering, during Monterey Car Week. He places Gunther Werks among the world’s leading 911-based restomod companies, and notes the difference from Singer: where Singer “reimagines” Porsche’s line-up, Gunther Werks “remasters” it. The company was named for NASA engineer Günther F. Wendt, whose attention to detail Peter Nam admired.
Smith traces the line back to the 400R in 2017, a 993 in the spirit of a GT3 RS that never was, with an air-cooled, naturally aspirated 4.0-litre and lots of carbon fibre, which launched at The Quail at about $700,000. The F-26, he writes, is inspired by the Porsche 935 Slantnose and revolutionises the Turbo platform with a 1,000 hp air-cooled flat-six, more than double the 400R’s output.

Engineering and carbon
The engine is cooled by a race-derived flat fan, which Gunther Werks says moves more than twice the air of a standard vertical fan and cools all six cylinders evenly. The body panels and doors are carbon fibre, along with the front and rear diffusers, the high-downforce rear wing inspired by the 935, the engine shroud, the steering wheel and a five-piece floor, all mounted on a stiffly braced steel 993 chassis. The F-26 name refers to a fighter jet, which Smith says inspired the paint colour, and to the 26-car production run.
Price had not been set at launch. Smith expected it to be seven figures, well above the 400R’s original price.


What Hypebeast reported
Eddie Eng’s feature for Hypebeast Magazine #38, posted online on 12 November 2026, is built around Peter Nam’s explanation of the company’s engineering-first approach. Nam says every Gunther Werks car starts as a 993, stripped to the bare chassis, which is reinforced to be as stiff as possible rather than modified. The builds also use double-wishbone suspension with long arms, and Nam credits the company with being first in the world to put a flat fan on top of an air-cooled engine.
Nam also told Hypebeast that the F-26 has the highest-performance air-cooled engine in the industry at 1,067 hp, and that Gunther Werks averages about 24 commissions a year, with builds in the seven-figure range. Colour choices range from conservative to bold, and Eng describes a white-and-pink car bound for Hong Kong and a white car with oxblood red interior parts made with The Thermal Club.

On DriveMarket
Sources
This story is an own-words summary of “911 Resto-Builder Gunther Werks Debuts Air-Cooled, 1000-Horse F-26” by Steven Cole Smith, published by Hagerty Media on 15 August 2025, and of “How to Turn a Vintage Porsche Into a Hypercar: Gunther Werks” by Eddie Eng, published by Hypebeast on 12 November 2026, which first appeared in Hypebeast Magazine #38. All credit for the reporting and opinions belongs to the authors and publications; please read the originals. Images are supplied by HK Motorcars and Gunther Werks. Porsche, 911 and 993 are marks of their respective owners and are used for identification only.
Model
Builders and sellers
Programs
For sale
Related stories
- Gunther Werks: Three Ways to Remaster a 993
- The Final SCRS: Tuthill Completes Its Run of 15
- Everrati Unveils Ultra-Rare Porsche 911 (993) Founders Edition: A Grand Touring Icon Reborn
- Encor Series 1: the Remastered Lotus Esprit, and Build Slots for Q1 2028 Delivery
- Restomods at Rétromobile New York 2026: Vintage Modern’s Fastback, Luminari, Rennquest and the Gooding Christie’s Sale
- Vintage Modern Vintage Fastback: 840 hp Carbon-Bodied Mustang Revealed at Rétromobile New York