Builder Spotlight

Vintage Modern Vintage Fastback: 840 hp Carbon-Bodied Mustang Revealed at Rétromobile New York

Vintage Modern has revealed the Vintage Fastback at Rétromobile New York: a hand-laid carbon-fibre, classic-inspired body on a modern S650 Mustang GT, with up to 840 hp. Here is what Road & Track and Car and Driver reported.

By
DriveMarket Editorial
Published
November 19, 2026

View source

Vintage Modern Vintage Fastback: 840 hp Carbon-Bodied Mustang Revealed at Rétromobile New York

Vintage Modern, the Atlanta builder known for its Bronco-inspired trucks, has revealed its first car. The Vintage Fastback was unveiled on 18 November 2026 at Rétromobile New York, the first US edition of the Paris classic-car show, which opens to the public at the Javits Center from 19 to 22 November. This story summarises how Road & Track and Car and Driver covered it.

The Vintage Fastback from the front. Photo: Vintage Modern.
The Vintage Fastback from the front. Photo: Vintage Modern.

At a glance

  • Platform: a current S650-generation Ford Mustang GT, per Road & Track and Car and Driver.
  • Body: carbon fibre, with panels hand-made in Detroit and the car assembled and finished in Atlanta, per Road & Track.
  • Engine: 5.0-litre V8 with 486 hp as standard; an optional 3.0-litre Whipple supercharger lifts output to 840 hp and 615 lb-ft, per Car and Driver and Road & Track.
  • Gearbox: six-speed manual or 10-speed automatic.
  • Build time: about 900 hours of hands-on work per car.

What Road & Track reported

Emmet White’s article, published on 18 November, calls the Fastback the “anti-restomod”. Instead of putting modern parts into an old car, Vintage Modern fits old-school body panels to a current Mustang GT. He stresses that it is more than a body kit: the car adds the Whipple supercharger, a choice of a six-speed manual with rev matching or a 10-speed automatic with paddles, an active-valve exhaust with four sound modes, MagneRide adaptive suspension, six drive modes and Brembo brakes.

White quotes founder and CEO Chau Nguyen: “The Vintage Fastback is a car we’ve always wanted to build.” He writes that the car has eight airbags, crumple zones, side-impact beams, stability control, traction control and ABS, and that it has been crash tested to meet the applicable federal safety standards. (Vintage Modern’s own page describes the car as one that “will be crash tested and FMVSS compliant”, so the testing status is worth confirming with the builder.) Most of the body panels, including the functional hood scoop, are carbon fibre. The obvious metal parts are billet aluminium: the grille, door handles, mirrors and auxiliary driving lights. Inside, Alcantara and billet-aluminium trim surround a choice of pleated, diamond-quilted or woven seats.

The Vintage Fastback in profile. Photo: Vintage Modern.
The Vintage Fastback in profile. Photo: Vintage Modern.

What Car and Driver reported

Brendan McAleer’s article places the Fastback in the context of Vintage Modern’s growth. He writes that the company started seven years ago with a truck that looked like a vintage Bronco, has built some 500 vehicles since, and has delivered them to owners including Mark Wahlberg and LeBron James.

McAleer says the Fastback has the look of the “Eleanor” 1967 Mustang GT500 from the film Gone in 60 Seconds, with enough changes to be its own car, and notes that Vintage Modern does not describe it as an Eleanor tribute. The big lower driving lights are one of the similarities he points out. Underneath, it is a 2026-or-newer S650 Mustang. He confirms the 486 hp V8, the two gearbox options and the 840 hp supercharged version, and says each car represents about 900 hours of assembly with hand-laid carbon-fibre panels. His view is that the build quality is what buyers are paying for.

Interior of the Vintage Fastback. Photo: Vintage Modern.
Interior of the Vintage Fastback. Photo: Vintage Modern.

Price, volume and expansion

Neither Road & Track nor Car and Driver gave a price at publication, and Vintage Modern does not list one on its Fastback page. Motor1 and Mansion Global both reported a US price of about $295,000; treat that as a press-reported figure until the builder confirms it.

According to Road & Track, Vintage Modern plans to move into a new factory three times the size of its current one, hire more than 100 people and triple production capacity within two years. Motor1 and Mansion Global say the company expects to build around 100 Fastbacks in the first year.

The Vintage Fastback from the rear. Photo: Vintage Modern.
The Vintage Fastback from the rear. Photo: Vintage Modern.

On DriveMarket

Sources

This story is an own-words summary of “The Vintage Modern Fastback Is the Anti-Restomod Mustang” by Emmet White, published by Road & Track on 18 November 2026, and of “Vintage Modern’s New Fastback Turns the Mustang into a Carbon-Fiber Movie Star” by Brendan McAleer, published by Car and Driver on 19 November 2026. Price and first-year volume figures come from Motor1 (Brian Potter, 19 November 2026) and Mansion Global (Jim Motavalli, 18 November 2026). Specifications and the safety statement come from Vintage Modern. All credit for the reporting and opinions belongs to the authors and publications; please read the originals. Images are supplied by Vintage Modern. Ford, Mustang and Shelby are marks of their respective owners and are used for identification only.