Builder Spotlight
Signature Autosports Meridian 911 #001: A $499,950 Safari 964 With 10 Inches of Wheel Travel
Signature Autosports reveals Meridian 911 #001, a 1989 Porsche 911 Carrera 4 rebuilt with a 3.8-litre flat-six, Baja-style suspension and exposed carbon, for $499,950.
- By
- DriveMarket Editorial
- Published
- November 18, 2026

Signature Autosports of Wilmington, North Carolina has revealed Meridian 911 #001, the first car in its Signature Revival Works Meridian 911 series. The build starts with a 1989 Porsche 911 Carrera 4, the 964 generation that brought all-wheel drive to the 911, and turns it into an air-cooled safari grand tourer. It is on sale now for $499,950.
Highlights
- Donor: 1989 Porsche 911 Carrera 4 (964), all-wheel drive retained.
- Engine: rebuilt 3.8-litre naturally aspirated flat-six with Pauter billet cylinder heads, individual throttle bodies and Haltech management. No output figure has been published.
- Suspension: Russell Built Sportsman Safari Kit with up to 10 inches of wheel travel and a 2-inch longer wheelbase.
- Body: gloss exposed-carbon fender extensions, bumpers and roof, with a Baja Designs light array.
- Interior: black leather and Alcantara by Signature’s in-house upholstery team.
- Price: $499,950 USD, in Wilmington, North Carolina.

A Porsche rebuilt around the long way round
Signature describes Meridian as neither a conventional restoration nor a cosmetic safari conversion. The idea is a 911 that still feels like a 911 from behind the wheel, but can tackle unpaved routes and imperfect pavement. Tunerzine notes that the car has covered only testing and delivery miles since the build was completed, and that the 964 donor is the same Type 964 platform used for Singer’s recent Louis Vuitton cars.
The flat-six
The 964’s original 3.6-litre flat-six has gone. In its place is a 3.8-litre engine built around new Mahle Motorsport pistons and cylinders, forged Pauter connecting rods, a forged crankshaft and ceramic-coated rod bearings, with upgraded head studs and a rebuilt oil pump. Pauter Machine made the billet aluminium cylinder heads, which have CNC-ported passages, oversized valves, performance springs and titanium retainers. Web Cam camshafts, IWIS timing chains and RSR-style sealing round out the top end.
Induction is by Clewett individual throttle bodies under a GT3-style carbon plenum, with a Haltech ECU, coil-on-plug ignition, a serpentine-belt conversion and a lightweight flywheel and clutch. Autoblog points out that the engine certainly makes more than the 247 hp of a stock 964, but that Signature has disclosed neither a redline nor any performance figures. Road & Track, writing in July when only computer-generated renderings of the car existed, quoted a claimed 365 hp for the planned engine; Signature has not repeated that number for the finished car.

Baja-derived suspension
The chassis uses Russell Built Fabrication’s Sportsman Safari Kit, which takes its architecture from NORRA Baja competition cars. It allows up to 10 inches of wheel travel, stretches the wheelbase by 2 inches and widens the track, with more ground clearance and skid plates underneath. Meridian #001 runs Eibach springs with KING Racing Shocks, black Russell Built Baja Lite wheels and BFGoodrich All-Terrain T/A KO3 tires. Autoblog observes that the tires and wheels fill the arches so completely that the standard 964 body could not cover them, which explains the carbon extensions.
Carbon and light
The gloss exposed-carbon front and rear fender extensions, bumper treatments and roof panel are left visible by design. The roof carries a Baja Designs light array, with more lights at the front edge of the hood and in the front bumper, plus darkened headlights and contrasting brake hardware.
Model
Builders and sellers
Programs
For sale
Related stories
- The 917 032 and 5LT at Goodwood 2018
- PS Automobile at the GERCollector Trackday 2024
- PS Automobile at the Porsche Days 2024 in Spa-Francorchamps
- Singer’s DLS Turbo “Light Poppy”: One Colour From Carbon to Cabin
- Theon Design at Ten: Anniversary 964, a Configurator, US Support and the Theon R
- Factory vs Independent: Porsche’s Push Into One-Offs and Re-Commissioning