Builder Spotlight
Classic Truck Chassis, 5 Things Nobody Tells You About Buying.
- By
- Casey Dekker
- Published
- November 03, 2026

At a Glance
Every classic truck we build starts with a chassis. Get this part wrong, and you could be looking at a five‑figure mistake. We've seen it happen. We've helped fix it. And we don't want it to happen to you.
This list breaks down the five things most chassis companies won't tell you—straight from our shop floor.
#1: Pick Your Wheels Before Your Axle
The mistake: Ordering a chassis, then picking wheels later.
The reality: Your wheel choice decides how wide your rear axle needs to be.
We learned this one the hard way…
The question that saves everything: What wheels do you want in the back?
- How much tire do you need?
- Do you need a mini tub?
- What about the front?
Pro tip: On a slammed truck sitting 5½ inches off the ground, every fraction of an inch counts.
#2: Read Your Chassis Quote Like a Detective
The mistake: Comparing quotes by price alone.
The reality: A cheap quote might be missing parts you'll need to buy anyway.
Parts that should be standard (but often aren't):
- Front sway bar
- Rack and pinion
- Disc brakes
- Ball joints & spindles
- Control arms
- Motor mounts
- Transmission mounts
Bottom line: Don't just ask “how much?” Ask “what’s included?”
#3: Know How Your Chassis Is Built
The mistake: Assuming all chassis are built the same way.
The 3 main ways to build a chassis:
- Mandrel‑bent tube
- Laser‑cut and welded
- Formed flat sheet (what we use)
Formed steel = 39% more material, up to 3× stronger, zero flex.
Extra weight = traction. No flex = handling. Consistency = perfect fitment.
Builders and sellers
Related stories
- How Fast Is An F100 Coyote 5.0 Swapped?
- Reviving a Classic: The Custom 1949 Ford F1 Truck
- Unveiling a Custom Masterpiece: The 1955 Ford F-100 by Fat Fender Garage
- Truck Rust: The Complete Buyer's Inspection Guide
- Fat Fender Garage Is Now an Official Ford Racing Parts Dealer
- Return vs Returnless Fuel System: The Complete Guide